Stove Fire Precaution

When you first learn to use a wood stove to heat your house, it seems tricky to light it. You have to follow some tips when lighting a stove. However, once you get the swing of it, you will find that is really is quite easy and can be accomplished with a few simple steps.

Here is how to light fire in stove:

1. Open the top and bottom air controls fully.

2. Place rolled up and scrunched up newspaper at the back of the wood burner. Put small tinder on top of the newspaper and then a few slightly larger pieces of wood on top of this. Next, light the newspaper and close the door.

3. Let the fire burn until all the pieces of wood are alight and burning. Then add more and larger pieces of wood or logs.

Moreover, you also should abide by these tips during this process.

When burning wood, once the fire is established at the bottom, air control can be closed so that all the air for the fire comes through the top air control. The bottom air control should normally remain closed once the small stove is running. But if the fire has been allowed to die too low, then the bottom air control can be opened to allow air to the base of the fire in an attempt to revive it. When burning coal and other solid fuels: use of the primary air is necessary.

Another point you should be pay attention is, do not run inset stoves with doors open. It may cause the house fire.

When you’re going to add woods for burning stove, stove gloves should be used as handle becomes hot when the stove is in use. In addition, never use wood burning stoves without firebricks in place - they protect the steel from oxidation.

Hope these tips may do helps for you, especially for stove green hands.

More related posts, please read：

Causes Of Stove Broken Glass


Specifications Of Wood Stoves

Causes For Poor Stove Performance

Sometimes, it seems that the wood stove just isn't working as well as it used to. Do you have such a feeling?

Maybe, you will meet other stove problems, such as smoking, catalyst malfunction, etc. However, today, I’d like to talk about the issue of wood burning stoves poor performance.

Here is a list of possible causes for poor stove performance you can consider. Hope you can benefit from them.

Worn or missing gaskets

Leaky inset stoves will often show a marked decrease in performance. You may find much information about checking and replacing the gaskets discussions.

Wood stove chimney needs cleaning

If the venting system is getting blocked with soot and creosote, it will make a world of difference in terms of performance and safety. Therefore, checking and cleaning your wood burner chimneys as more as well.

Poor wood supply

Are you using the same fuel as always, or a new load? If your wood's too green or wet, it might be the culprit. Burn some other materials, for instance, oak tree.

Changes in the house

Have you recently altered the house, by adding insulation, replacement windows, or new caulking?

Of course, these are not all causes that cause your small stove work inefficiently. You can find other reasons that cause poor performance.

For more wonderful information about stoves, please continue reding my posts.

Related articles:

Make your stove work more efficiently

Energy saving create an efficient home

Specifications Of Wood Stoves

Recently, I saw lots of questions on yahoo about installation of wood stove. Some individuals don’t know how to install a newly-bought wood stove. Some want to install it by themselves.

Here are some specifications of installing inset stoves, you must follow to get the maximum advantage out of a wood stove:

It is always better to get professional help for installing the wood stove. In the beginning, you might not see any problem with the working of the stove, however, once a problem arises, it can become the terrible, serious cause factor of a house fire. Therefore, in order for your family’s safety, don’t try to install it by yourself. It is so dangerous.

Moreover, assure having a chimney for each wood burner. If you are installing a stove at the place where the fireplace was built, do not forget to check out how old the chimney is before attaching the stove pipe. If the chimney was built decades ago, there are chances that it may not be up to the present safety standards.

In addition, you should consider the layout of your house and lifestyle of your familywhile placing a wood stove. As the stove will heat its direct surroundings, it will be better to install it in a space where all of you spend most of the time.

Then, be clear about the minimum clearance requirements before placing wood burning stoves. The distance of the wood stove from the surrounding walls and floors will depend upon the following factors:

1. Are walls and floors combustible?

2. Certification of the stove and its manufacturing as per safety requirements.

3. Do you want to install heat shields on the combustible walls?

After finishing reading this articles, are you familiar about the specifications of wood stoves? For more stove articles, you can read here:

Tips for camping stoves

What Is Biomass Stove?

How Long Could A Stove Burn?

Do you care about the burn time of your stove? Some stove can burn over night, some only can burn few hours. How long does your stove last?

How long of burn time can I expect from one burn period, before filling the stove with more coal?

Therefore, what are these factors that affect burning time of inset stoves on earth? There are a lot of variables that can affect the burn time of the unit. These variables include the exterior weather conditions, room temperature desired, draft of the chimney, as well as many other conditions. Results may vary, but the average burn time between loads ranges from 8- 24 hours. These burn times may exceed the averages, according to various situations.

Maximum estimated wood stove burn time. Burn time depends on wood species and moisture content, and on how much heat is needed during the burn. How long will a given stove burn on a single load of wood? The only reasonable answer is: It depends.

Here is a piece of advice for you. You can consider buying a catalytic stove. One advantage of catalytic wood burning stoves is that the good ones can deliver a lower burn rate over a longer period than non-catalytic wood stoves and yet still burn clean. No things are perfect. So the disadvantage of these long burn times is that the door glass tends to get dirty at very low firing rates. If you don’t mind dirty and you’re also willing to do the cleaning, you can buy a catalytic wood burner.

In other words, a stove that has a claimed burn time of ten hours may not be better or more convenient to use than one that delivers an eight hour burn.

Related articles you may be fond:

Make your stove work more efficiently

Inset Stoves And Gas Stoves

Inset Stoves And Gas Stoves

The look and feel of a warm fire burning in a home fireplace spells comfort to many. A fireplace evokes pleasant memories of campfires or bonfires, and evokes a feeling of security and well-being. Do you have the felling? I have.

Do you know what a traditional fireplace of wood stove look like? A conventional wood fireplace is rectangular and features a fireplace surround made of bricks or stones. And another feature of traditional wood fireplace designs is a wooden mantel made of cherry or mahogany.

Homemakers who want a traditional style with a little flair would like to select to add marble or ceramic tile around the fireplace and under the mantel. Even if traditional style is timeless, homeowners should still consider updating their traditional wood fireplaces with modern elements from time to time.

You must have heard of the inset stove. Inset stoves that fundamentally feature a shell set up into your open fireplace can transform an average hearth into an affordable and aesthetically beautiful source of heat. Normally, inset stoves can effortlessly fit into a standard fireplace and can offer an assortment of advantages that make them ideal for any home. You can choose small stove or bigger inset stove.

The insert can be customized to fit the existing firebox and to use the existing chimney. The wood burner with insert is popular in cottage country, where a natural gas hookup may not be readily available.

If you want to buy a stove, you can consider choosing a natural gas fireplace, which do not require the work involved in cutting, piling and storing wood in contrast with wood burning stoves. Cleaning is less of an issue as creosote and ash are not present. Gas fireplaces can be made to look like brick or masonry or fitted with wooden mantels to enhance any decor.

Related reading:

Origin Of Stove, Cast Iron Stove

Why shopping online?